From cehoyos at ag.or.at
1 00:34:57 2012
From: cehoyos at ag.or.at (Carl Eugen Hoyos)
Date: Fri, 30 Nov :57 +0000 (UTC)
Subject: [FFmpeg-user] AAC
"channel element not allocated"
References:
Message-ID:
robin <divineguo
163.com> writes:
> I have a .aacfile (4Channels.aac) which shows up with
> 4 audio channels, and produces the famous channel
> element 3.0 is not allocated" message when ffmpeg
> tries to decode it.
Which software decodes the sample?
For future questions: Please always test current git
head before reporting problems and please always
provide your failing command line together with
complete, uncut console output.
Carl Eugen
From ffmpeg at frank.haefemeier.eu
1 01:40:56 2012
From: ffmpeg at frank.haefemeier.eu (Frank =?ISO-8859-1?Q?H=E4femeier?=)
Date: Sat, 01 Dec :56 +0100
Subject: [FFmpeg-user] Video and audio out of sync - general question
In-Reply-To:
References:
Message-ID:
Am Freitag, den 30.11. +0000 schrieb Carl Eugen Hoyos:
> JULIAN GARDNER <joolzg
btinternet.com> writes:
> > Im still getting these problems, as i posted before.
> > As a recap
> I re-read this whole thread (and it seems I completely
> misunderstood Frank), but I did not find a problem
IMHO, I provoke the misunderstanding, because the subject was wrong in
sense of what I wanted to know.
From lou at lrcd.com
1 01:41:30 2012
From: lou at lrcd.com (Lou)
Date: Fri, 30 Nov :30 -0900
Subject: [FFmpeg-user] libdc1394 troubles
In-Reply-To:
References:
Message-ID:
On Fri, 30 Nov :31 -0500
Bryan Goldstein
> I am new to ffmpeg and I am having some trouble using my libdc1394
> supported webcam with it. I keep getting the same error:
> [libdc1394 @ 0x1722520] Can't find matching camera format for uyvy422,
> 320x240 at fps
> hw:0,0: Operation not permitted
> Here is some build info:
> ffmpeg version N-4c19 Copyright (c)
the FFmpeg
> developers
built on Nov 30 :28 with gcc 4.5.3 (GCC)
(prerelease)
configuration: --enable-libdc1394
9.102 / 52.
libavcodec
54. 77.100 / 54. 77.100
libavformat
54. 40.100 / 54. 40.100
libavdevice
3.100 / 54.
libavfilter
3. 23.104 /
libswscale
libswresample
0. 17.101 /
> libdc1394 version is 2.2.0
> Camera is Chameleon CMLN-13S2C
> Does anyone have any idea as to what I could be doing wrong?
Please provide the complete ffmpeg command line and the complete, uncut
console output.
From redpenguinmail at gmail.com
1 02:43:47 2012
From: redpenguinmail at gmail.com (Mr M)
Date: Fri, 30 Nov :47 -0500
Subject: [FFmpeg-user] -ss can't take anything over 23 hours in the hour
Message-ID:
I am using ffmpeg on Windows from Zeranoe and tried multiple versions.
If I have a long file like I was just trying a 55hr flv, it says
24:51:00 is invalid so I had to convert it to seconds.
The version of ffmpeg included in the latest WinFF for Windows totally
ignored the "invalid" -ss just converting from the beginning.
Is there some way you are supposed to format 24+ hours besides
calculating seconds always?
From redpenguinmail at gmail.com
1 03:00:01 2012
From: redpenguinmail at gmail.com (Mr M)
Date: Fri, 30 Nov :01 -0500
Subject: [FFmpeg-user] -ss can't take anything over 23 hours in the hour
In-Reply-To:
References:
Message-ID:
Sorry forgot to mention if I try any number with 23 hours or less it
always works.
Like 23:05:03 or 01:15:00 just the minute I try 24+ fails.
From cehoyos at ag.or.at
1 03:03:49 2012
From: cehoyos at ag.or.at (Carl Eugen Hoyos)
Date: Sat, 1 Dec :49 +0000 (UTC)
Subject: [FFmpeg-user] -ss can't take anything over 23 hours in the hour
References:
Message-ID:
Mr M <redpenguinmail
gmail.com> writes:
> If I have a long file like I was just trying a 55hr
> flv, it says 24:51:00 is invalid so I had to convert
> it to seconds.
Please add the command line you tried together with
the complete, uncut console output.
Carl Eugen
From redpenguinmail at gmail.com
1 03:14:17 2012
From: redpenguinmail at gmail.com (Mr M)
Date: Fri, 30 Nov :17 -0500
Subject: [FFmpeg-user] -ss can't take anything over 23 hours in the hour
In-Reply-To:
References:
Message-ID:
On Fri, Nov 30, 2012 at 9:03 PM, Carl Eugen Hoyos
> Please add the command line you tried together with
> the complete, uncut console output.
> Carl Eugen
ffmpeg -ss 24:51:00 -t 02:25:00 -i gy-11-10-724.flv -vcodec libxvid
-b:v 981k -r 29.970 -acodec libmp3lame -b:a 128k -async 1 cut6.avi
ffmpeg version N-4aeb1 Copyright (c)
the FFmpeg developers
built on Nov 20 :37 with gcc 4.7.2 (GCC)
configuration:
--enable-gpl --enable-version3 --disable-pthreads
--enable-runtime-cpudetect --enable-avisynth --enable-bzlib
--enable-frei0r --enable-libass --enable-libopencore-amrnb
--enable-libopencore-amrwb --enable-libfreetype --enable-libgsm
--enable-libmp3lame --enable-libnut --enable-libopenjpeg
--enable-libopus --enable-librtmp --enable-libschroedinger
--enable-libspeex --enable-libtheora --enable-libutvideo
--enable-libvo-aacenc --enable-libvo-amrwbenc --enable-lira
--enable-libutvideo --enable-libvo-aacenc --enable-libvo-amrwbenc
--enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxavs
--enable-libxvid --enable-zlib
8.100 / 52.
libavcodec
54. 74.100 / 54. 74.100
libavformat
54. 37.100 / 54. 37.100
libavdevice
3.100 / 54.
libavfilter
3. 23.101 /
libswscale
libswresample
0. 17.101 /
libpostproc
2.100 / 52.
Invalid duration specification for ss: 24:51:00
From av at bsbc.nb.ca
1 20:16:03 2012
From: av at bsbc.nb.ca (Anthony Brown)
Date: Sat, 01 Dec :03 -0400
Subject: [FFmpeg-user] libdc1394 troubles
In-Reply-To:
References:
Message-ID:
On 12-11-30 05:03 PM, Bryan Goldstein wrote:
> I am new to ffmpeg and I am having some trouble using my libdc1394
> supported webcam with it. I keep getting the same error:
> [libdc1394 @ 0x1722520] Can't find matching camera format for uyvy422,
> 320x240 at fps
> hw:0,0: Operation not permitted
Wild guess, but dvgrab requires running as root to access 1394 devices,
at least on any machine I've used it on, perhaps ffmpeg does too?
Anthony Brown
Audiovisual coordinator
Brunswick Street Baptist Church
Telephone: (506)-458-8348 (leave message)
av at bsbc.nb.ca
-------------- next part --------------
A non-text attachment was scrubbed...
Name: av.vcf
Type: text/x-vcard
Size: 163 bytes
Desc: not available
From brysgo at gmail.com
2 17:13:22 2012
From: brysgo at gmail.com (Bryan Goldstein)
Date: Sun, 2 Dec :22 -0500
Subject: [FFmpeg-user] libdc1394 troubles
In-Reply-To:
References:
Message-ID:
Here it is uncut:
omap3-multi:~$ sudo ffmpeg -loglevel debug -v verbose -f libdc1394 -i
hw:0,0 -vcodec mpeg4 -b:v 10000k -bufsize 150000k -r 640x480
http://127.0.0.1:8090/feed1.ffm
ffmpeg version N-4c19 Copyright (c)
the FFmpeg
developers
built on Nov 30 :28 with gcc 4.5.3 (GCC)
(prerelease)
configuration: --enable-libdc1394
9.102 / 52.
libavcodec
54. 77.100 / 54. 77.100
libavformat
54. 40.100 / 54. 40.100
libavdevice
3.100 / 54.
libavfilter
3. 23.104 /
libswscale
libswresample
0. 17.101 /
[libdc1394 @ 0x1cdc520] Can't find matching camera format for uyvy422,
320x240 at fps
hw:0,0: Operation not permitted
However, I can still get the same output by just doing `ffmpeg -f libdc1394
-i hw:0,0`
On Fri, Nov 30, 2012 at 7:41 PM, Lou
> On Fri, 30 Nov :31 -0500
> Bryan Goldstein
> > Hello,
> > I am new to ffmpeg and I am having some trouble using my libdc1394
> > supported webcam with it. I keep getting the same error:
> > [libdc1394 @ 0x1722520] Can't find matching camera format for uyvy422,
> > 320x240 at fps
> > hw:0,0: Operation not permitted
> > Here is some build info:
> > ffmpeg version N-4c19 Copyright (c)
the FFmpeg
> > developers
built on Nov 30 :28 with gcc 4.5.3 (GCC)
> (prerelease)
configuration: --enable-libdc1394
9.102 / 52.
libavcodec
54. 77.100 / 54. 77.100
libavformat
54. 40.100 / 54. 40.100
libavdevice
3.100 / 54.
libavfilter
3. 23.104 /
libswscale
libswresample
0. 17.101 /
> > libdc1394 version is 2.2.0
> > Camera is Chameleon CMLN-13S2C
> > Does anyone have any idea as to what I could be doing wrong?
> > Thanks,
> Please provide the complete ffmpeg command line and the complete, uncut
> console output.
> _______________________________________________
> ffmpeg-user mailing list
> ffmpeg-user at ffmpeg.org
> http://ffmpeg.org/mailman/listinfo/ffmpeg-user
From brysgo at gmail.com
2 17:16:56 2012
From: brysgo at gmail.com (Bryan Goldstein)
Date: Sun, 2 Dec :56 -0500
Subject: [FFmpeg-user] libdc1394 troubles
In-Reply-To:
References:
Message-ID:
Hi Anthony,
I don't think that's it, I tried running it as root and got the same
On Sat, Dec 1, 2012 at 2:16 PM, Anthony Brown
> On 12-11-30 05:03 PM, Bryan Goldstein wrote:
>> I am new to ffmpeg and I am having some trouble using my libdc1394
>> supported webcam with it. I keep getting the same error:
>> [libdc1394 @ 0x1722520] Can't find matching camera format for uyvy422,
>> 320x240 at fps
>> hw:0,0: Operation not permitted
> Wild guess, but dvgrab requires running as root to access 1394 devices, at
> least on any machine I've used it on, perhaps ffmpeg does too?
> Anthony Brown
> Audiovisual coordinator
> Brunswick Street Baptist Church
> Telephone: (506)-458-8348 (leave message)
av at bsbc.nb.ca
> _______________________________________________
> ffmpeg-user mailing list
> ffmpeg-user at ffmpeg.org
> http://ffmpeg.org/mailman/listinfo/ffmpeg-user
From dave at arthistory.cc
2 18:51:59 2012
From: dave at arthistory.cc (dave at arthistory.cc)
Date: Sun, 02 Dec :59 +0100
Subject: [FFmpeg-user] Streaming text with libavfilter drawtext
Message-ID:
Just for info I have at least tried to search this list for an answer
before posting.
I have a streaming text that I would like to get added to my stream. What
I'm aiming for here is to get data.txt re-read every second so the textdata
in that(that updates every 0.1 seconds) will be shown in my stream:
-f dshow -i
video="Integrated Camera":audio="Internal Microphone
(Conexant 2"
-s 320x240 -r 30 -metadata title="my soo awesome video"
-loglevel warning -vf
drawtext=fontfile=arial.ttf:fontcolor=white:shadowcolor=black:x=100:y=x/dar:textfile='data.txt'
-f flv rtmp://698400.fme.bambuser.com/b-fme/myuserid
I have tested to add draw=lt(mod(t\,1)\,1) but what I'm looking for is
really redraw=every second.
If this is not possible to achieve please redirect to the source code for
adding that option, if you got time.
From nicolas.george at normalesup.org
2 20:01:04 2012
From: nicolas.george at normalesup.org (Nicolas George)
Date: Sun, 2 Dec :04 +0100
Subject: [FFmpeg-user] Streaming text with libavfilter drawtext
In-Reply-To:
References:
Message-ID:
Le duodi 12 frimaire, an CCXXI, dave at arthistory.cc a ?crit?:
> Just for info I have at least tried to search this list for an answer
> before posting.
> I have a streaming text that I would like to get added to my stream. What
> I'm aiming for here is to get data.txt re-read every second so the textdata
> in that(that updates every 0.1 seconds) will be shown in my stream:
This is not currently possible. Please tell me if the following patch:
http://ffmpeg.org/pipermail/ffmpeg-devel/2012-December/135176.html
would suit your needs. Note that it reloads the text for each frame rather
given the amount of work that drawtext must perform, this
is not a big issue IMHO.
Nicolas George
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: Digital signature
From dave at arthistory.cc
2 20:40:47 2012
From: dave at arthistory.cc (=?ISO-8859-1?Q?David_N=E4svik?=)
Date: Sun, 02 Dec :47 +0100
Subject: [FFmpeg-user] Streaming text with libavfilter drawtext
In-Reply-To:
References:
Message-ID:
Yes that would actually be perfect!
You haven't submit it to git. I will try tomorrow to build it.
20:01, Nicolas George wrote:
> Le duodi 12 frimaire, an CCXXI, dave at arthistory.cc a ?crit :
>> Just for info I have at least tried to search this list for an answer
>> before posting.
>> I have a streaming text that I would like to get added to my stream. What
>> I'm aiming for here is to get data.txt re-read every second so the textdata
>> in that(that updates every 0.1 seconds) will be shown in my stream:
> This is not currently possible. Please tell me if the following patch:
> http://ffmpeg.org/pipermail/ffmpeg-devel/2012-December/135176.html
> would suit your needs. Note that it reloads the text for each frame rather
> given the amount of work that drawtext must perform, this
> is not a big issue IMHO.
> Regards,
> _______________________________________________
> ffmpeg-user mailing list
> ffmpeg-user at ffmpeg.org
> http://ffmpeg.org/mailman/listinfo/ffmpeg-user
From levanchelidze at gmail.com
2 03:00:08 2012
From: levanchelidze at gmail.com (Levan Chelidze)
Date: Sun, 2 Dec :08 +0400
Subject: [FFmpeg-user] Help with encoding
Message-ID:
I have a problem with encoding a video.
So I have a video:
> Format profile
: QuickTime
> Codec ID
> File size
> Duration
> Overall bit rate
: 11.8 Mbps
> Encoded date
> Tagged date
> Writing library
: Apple QuickTime
> Format/Info
: Advanced Video Codec
> Format profile
: Main at L4.0
> Format settings, CABAC
> Format settings, ReFrames
: 2 frames
> Codec ID
> Codec ID/Info
: Advanced Video Coding
> Duration
> Bit rate
: 10.3 Mbps
: 1 888 pixels
> Original width
: 1 920 pixels
: 1 062 pixels
> Original height
: 1 080 pixels
> Display aspect ratio
> Frame rate mode
: Constant
> Frame rate
: 25.000 fps
> Color space
> Chroma subsampling
> Bit depth
> Scan type
: Progressive
> Bits/(Pixel*Frame)
> Stream size
: 266 MiB (87%)
> Language
> Encoded date
> Tagged date
> Color primaries
> Transfer characteristics
> Matrix coefficients
> Format settings, Endianness
> Format settings, Sign
> Codec ID
> Duration
> Bit rate mode
: Constant
> Bit rate
: 1 536 Kbps
> Channel(s)
: 2 channels
> Channel positions
: Front: L R
> Sampling rate
: 48.0 KHz
> Bit depth
> Stream size
: 39.8 MiB (13%)
> Language
> Encoded date
> Tagged date
I want to convert it to .ogg file and preserve its:
audio/video parameters like bit rate aspect ratio and amount of pixels, but
when I try to encode it with ffmpeg it always lowers audio/video bit rate.
can you tell me a commend that will output a similar file like the source
Thank you in advanced
From levanchelidze at gmail.com
2 03:07:12 2012
From: levanchelidze at gmail.com (Levan Chelidze)
Date: Sun, 2 Dec :12 +0400
Subject: [FFmpeg-user] multi pass encoding
Message-ID:
Sorry I am really new to this and have problems doing some tasks without
So I got a terminal commend
ffmpeg -y -i '/media/levan/BEEA60D8EA608E89/Downloads/Videos/Tony Braxton -
> Un-Break My Heart.VOB' -s
-aspect 16:9 -r 25 -b 15550k -bt 19792k
> -vcodec libtheora -acodec libvorbis -ac 2 -ar 48000 -ab 320k ddd.ogg
and I want to have 3 pass video in output video but how to do this I do not
know can some on help me
I found that I must write -pass n commend some where but where to write it
I do not know. I tested this and wrote -pass 3 at the end terminal just
showed > symbol
can you give me a commend that will work
Thank you in advanced
From cehoyos at ag.or.at
3 05:31:25 2012
From: cehoyos at ag.or.at (Carl Eugen Hoyos)
Date: Mon, 3 Dec :25 +0000 (UTC)
Subject: [FFmpeg-user] Help with encoding
References:
Message-ID:
Levan Chelidze <levanchelidze
gmail.com> writes:
> I want to convert it to .ogg file and preserve its:
> audio/video parameters like bit rate aspect ratio and
> amount of pixels, but when I try to encode it with
> ffmpeg it always lowers audio/video bit rate.
Command line and complete, uncut console output missing.
(I do not easily remember a report where mediainfo
output helped, but ffmpeg command line including the
complete, uncut console output is always necessary.)
Carl Eugen
From cehoyos at ag.or.at
3 05:32:47 2012
From: cehoyos at ag.or.at (Carl Eugen Hoyos)
Date: Mon, 3 Dec :47 +0000 (UTC)
Subject: [FFmpeg-user] multi pass encoding
References:
Message-ID:
Levan Chelidze <levanchelidze
gmail.com> writes:
> I want to have 3 pass video in output video but how
> to do this I do not know can some on help me
> I found that I must write -pass n commend some where
> but where to write it I do not know. I tested this
> and wrote -pass 3 at the end terminal just
> showed > symbol
Please provide the failing command line including
the complete, uncut console output.
Carl Eugen
From Prince.Gupta at hcl.com
3 05:49:53 2012
From: Prince.Gupta at hcl.com (Prince Gupta)
Date: Mon, 3 Dec :53 +0530
Subject: [FFmpeg-user] Unable to install ffmpeg on Solaris 10
Message-ID:
I am unable to install ffmpeg on Solaris 10. I am getting following errors while configuring :
Broken shell detected.
Trying alternatives.
Trying shell bash
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- E
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- E
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- E
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- E
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- E
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
grep: illegal option -- q
Usage: grep -hblcnsviw pattern file . . .
gcc is unable to create an executable file.
If gcc is a cross-compiler, use the --enable-cross-compile option.
Only do this if you know what cross compiling means.
C compiler test failed.
If you think configure made a mistake, make sure you are using the latest
version from Git.
If the latest version fails, report the problem to the
ffmpeg-user at ffmpeg.org mailing list or IRC #ffmpeg on irc.freenode.net.
Include the log file "config.log" produced by configure as this will help
solving the problem.
I have also replaced grep with usr/xpg4/bin/grep in configure but still getting following errors :
Broken shell detected.
Trying alternatives.
Trying shell bash
gcc is unable to create an executable file.
If gcc is a cross-compiler, use the --enable-cross-compile option.
Only do this if you know what cross compiling means.
C compiler test failed.
If you think configure made a mistake, make sure you are using the latest
version from Git.
If the latest version fails, report the problem to the
ffmpeg-user at ffmpeg.org mailing list or IRC #ffmpeg on irc.freenode.net.
Include the log file "config.log" produced by configure as this will help
solving the problem.
Please help me to compile and install ffmpeg on Solaris 10.
Thanks in advance.
Prince Gupta
::DISCLAIMER::
----------------------------------------------------------------------------------------------------------------------------------------------------
The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted,
lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents
(with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates.
Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the
views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification,
distribution and / or publication of this message without the prior written consent of authorized representative of
HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately.
Before opening any email and/or attachments, please check them for viruses and other defects.
----------------------------------------------------------------------------------------------------------------------------------------------------
From cehoyos at ag.or.at
3 12:06:20 2012
From: cehoyos at ag.or.at (Carl Eugen Hoyos)
Date: Mon, 3 Dec :20 +0000 (UTC)
Subject: [FFmpeg-user] Unable to install ffmpeg on Solaris 10
References:
Message-ID:
Prince Gupta <Prince.Gupta
hcl.com> writes:
> I am unable to install ffmpeg on Solaris 10. I am
> getting following errors while configuring :
Did you change your PATH to find Posix grep etc.?
(Assuming you installed it first.)
And don't forget that your shell is not Posix-compatible, read
http://ffmpeg.org/platform.html#g_t_0028Open_0029Solaris
> The contents of this e-mail and any attachment(s) are
> confidential and intended for the named recipient(s) only.
(Please note that this does not make much sense when posting
on a public mailing list.)
Carl Eugen
From Prince.Gupta at hcl.com
3 12:50:47 2012
From: Prince.Gupta at hcl.com (Prince Gupta)
Date: Mon, 3 Dec :47 +0530
Subject: [FFmpeg-user] Unable to install ffmpeg on Solaris 10
In-Reply-To:
References:
Message-ID:
Thanks a lot for reply.
I have changed the path in configure file to /usr/xpg4/bin/grep . I also got succeeded to compile the ffmpeg using following :
./configure --disable-yasm --extra-libs=/usr/lib/values-xpg6.o --enable-cross-compile --arch=x86_64 --target-os=sunos --extra-cflags="-fPIC" --disable-mmx --disable-protocol=udp --disable-encoder=nellymoser --disable-demuxer=mpc8
But after configuring when I run make command I got following errors :
bash-3.00# make
./version.sh: syntax error at line 5: `revision=$' unexpected
libavdevice/alldevices.o
In file included from /usr/include/sys/wait.h:24,
from /usr/include/stdlib.h:22,
from libavutil/common.h:35,
from libavutil/avutil.h:274,
from libavdevice/version.h:28,
from libavdevice/avdevice.h:22,
from libavdevice/alldevices.c:22:
/usr/include/sys/siginfo.h:259: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:292: error: parse error before '}' token
/usr/include/sys/siginfo.h:294: error: parse error before '}' token
/usr/include/sys/siginfo.h:390: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:392: error: conflicting types for `__proc'
/usr/include/sys/siginfo.h:261: error: previous declaration of `__proc'
/usr/include/sys/siginfo.h:398: error: conflicting types for `__fault'
/usr/include/sys/siginfo.h:267: error: previous declaration of `__fault'
/usr/include/sys/siginfo.h:404: error: conflicting types for `__file'
/usr/include/sys/siginfo.h:273: error: previous declaration of `__file'
/usr/include/sys/siginfo.h:420: error: conflicting types for `__prof'
/usr/include/sys/siginfo.h:287: error: previous declaration of `__prof'
/usr/include/sys/siginfo.h:424: error: conflicting types for `__rctl'
/usr/include/sys/siginfo.h:291: error: previous declaration of `__rctl'
/usr/include/sys/siginfo.h:426: error: parse error before '}' token
/usr/include/sys/siginfo.h:428: error: parse error before '}' token
/usr/include/sys/siginfo.h:432: error: parse error before "k_siginfo_t"
/usr/include/sys/siginfo.h:437: error: parse error before '}' token
In file included from /usr/include/sys/procset.h:24,
from /usr/include/sys/wait.h:25,
from /usr/include/stdlib.h:22,
from libavutil/common.h:35,
from libavutil/avutil.h:274,
from libavdevice/version.h:28,
from libavdevice/avdevice.h:22,
from libavdevice/alldevices.c:22:
/usr/include/sys/signal.h:85: error: parse error before "siginfo_t"
In file included from /usr/include/stdlib.h:22,
from libavutil/common.h:35,
from libavutil/avutil.h:274,
from libavdevice/version.h:28,
from libavdevice/avdevice.h:22,
from libavdevice/alldevices.c:22:
/usr/include/sys/wait.h:86: error: parse error before "siginfo_t"
make: *** [libavdevice/alldevices.o] Error 1
Please help if you know about it .
-----Original Message-----
From: ffmpeg-user-bounces at ffmpeg.org [mailto:ffmpeg-user-bounces at ffmpeg.org] On Behalf Of Carl Eugen Hoyos
Sent: Monday, December 03,
To: ffmpeg-user at ffmpeg.org
Subject: Re: [FFmpeg-user] Unable to install ffmpeg on Solaris 10
Prince Gupta <Prince.Gupta
hcl.com> writes:
> I am unable to install ffmpeg on Solaris 10. I am
> getting following errors while configuring :
Did you change your PATH to find Posix grep etc.?
(Assuming you installed it first.)
And don't forget that your shell is not Posix-compatible, read
http://ffmpeg.org/platform.html#g_t_0028Open_0029Solaris
> The contents of this e-mail and any attachment(s) are
> confidential and intended for the named recipient(s) only.
(Please note that this does not make much sense when posting
on a public mailing list.)
Carl Eugen
_______________________________________________
ffmpeg-user mailing list
ffmpeg-user at ffmpeg.org
http://ffmpeg.org/mailman/listinfo/ffmpeg-user
::DISCLAIMER::
----------------------------------------------------------------------------------------------------------------------------------------------------
The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted,
lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents
(with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates.
Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the
views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification,
distribution and / or publication of this message without the prior written consent of authorized representative of
HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately.
Before opening any email and/or attachments, please check them for viruses and other defects.
----------------------------------------------------------------------------------------------------------------------------------------------------
From cehoyos at ag.or.at
3 13:15:51 2012
From: cehoyos at ag.or.at (Carl Eugen Hoyos)
Date: Mon, 3 Dec :51 +0000 (UTC)
Subject: [FFmpeg-user] Unable to install ffmpeg on Solaris 10
References:
Message-ID:
Prince Gupta <Prince.Gupta
hcl.com> writes:
> I have changed the path in configure file to /usr/xpg4/bin/grep
Don't do that, fix your PATH before running configure.
> I also got succeeded to compile the ffmpeg
You succeeded with configure or compile?
> using following :
> ./configure --disable-yasm --extra-libs=/usr/lib/values-xpg6.o
> --enable-cross-compile --arch=x86_64 --target-os=sunos
Do you know what "--enable-cross-compile" does?
Are you sure that this is what you want?
> --extra-cflags="-fPIC" --disable-mmx --disable-protocol=udp
> --disable-encoder=nellymoser --disable-demuxer=mpc8
Do you have gcc installed?
Do not try to compile FFmpeg with sun-cc, even if it
works, the resulting executable is either ridiculously
slow or completely broken.
Compilation with gcc on sunos is tested regularly and
expected to work.
Please do not top-post here, Carl Eugen
From cehoyos at ag.or.at
3 13:17:54 2012
From: cehoyos at ag.or.at (Carl Eugen Hoyos)
Date: Mon, 3 Dec :54 +0000 (UTC)
Subject: [FFmpeg-user] Unable to install ffmpeg on Solaris 10
References:
Message-ID:
Carl Eugen Hoyos <cehoyos
ag.or.at> writes:
> Compilation with gcc on sunos is tested regularly and
> expected to work.
--disable-debug may be necessary.
Carl Eugen
From Prince.Gupta at hcl.com
3 14:57:30 2012
From: Prince.Gupta at hcl.com (Prince Gupta)
Date: Mon, 3 Dec :30 +0530
Subject: [FFmpeg-user] FW:
Unable to install ffmpeg on Solaris 10
Message-ID:
I am not sure about the options I have mentioned with configure. I found them on a site.
I have succeeded with configure.
I have gcc installed with version :
bash-3.00# make --version
'GNU Make 3.82
Built for sparc-sun-solaris2.10
Copyright (C) 2010
Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
root at becOMAP1[/var/tmp/Media/ffmpeg-1.0]>pkginfo -l | grep -i gcc
SUNWgccruntime
GCC Runtime libraries
GCC Runtime - Shared libraries used by gcc and other gnu components
I would request you to mention the steps so that I can follow them to make it work . I will be really helpful.
-----Original Message-----
From: ffmpeg-user-bounces at ffmpeg.org [mailto:ffmpeg-user-bounces at ffmpeg.org] On Behalf Of Carl Eugen Hoyos
Sent: Monday, December 03,
To: ffmpeg-user at ffmpeg.org
Subject: Re: [FFmpeg-user] Unable to install ffmpeg on Solaris 10
Prince Gupta <Prince.Gupta
hcl.com> writes:
> I have changed the path in configure file to /usr/xpg4/bin/grep
Don't do that, fix your PATH before running configure.
> I also got succeeded to compile the ffmpeg
You succeeded with configure or compile?
> using following :
> ./configure --disable-yasm --extra-libs=/usr/lib/values-xpg6.o
> --enable-cross-compile --arch=x86_64 --target-os=sunos
Do you know what "--enable-cross-compile" does?
Are you sure that this is what you want?
> --extra-cflags="-fPIC" --disable-mmx --disable-protocol=udp
> --disable-encoder=nellymoser --disable-demuxer=mpc8
Do you have gcc installed?
Do not try to compile FFmpeg with sun-cc, even if it
works, the resulting executable is either ridiculously
slow or completely broken.
Compilation with gcc on sunos is tested regularly and
expected to work.
Please do not top-post here, Carl Eugen
_______________________________________________
ffmpeg-user mailing list
ffmpeg-user at ffmpeg.org
http://ffmpeg.org/mailman/listinfo/ffmpeg-user
::DISCLAIMER::
----------------------------------------------------------------------------------------------------------------------------------------------------
The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted,
lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents
(with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates.
Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the
views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification,
distribution and / or publication of this message without the prior written consent of authorized representative of
HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately.
Before opening any email and/or attachments, please check them for viruses and other defects.
----------------------------------------------------------------------------------------------------------------------------------------------------
From cehoyos at ag.or.at
3 15:14:28 2012
From: cehoyos at ag.or.at (Carl Eugen Hoyos)
Date: Mon, 3 Dec :28 +0000 (UTC)
Subject: [FFmpeg-user] FW:
Unable to install ffmpeg on Solaris 10
References:
Message-ID:
Prince Gupta <Prince.Gupta
hcl.com> writes:
> I have gcc installed with version :
> bash-3.00# make --version
make != gcc
Stop top-posting here, it is considered very rude!
Carl Eugen
From nospam at joakims.com
3 16:42:10 2012
From: nospam at joakims.com (Joakim Simonsson)
Date: Mon, 3 Dec :10 +0100
Subject: [FFmpeg-user] Unable to analyze/transcode mp3
Message-ID:
I have some issues with the following mp3:
http://nl.nrk.no/podkast/aps/10908/nrk_radioresepsjonen_25_.mp3
It plays, without any problems in vlc. However, both ffmpeg and ffprobe
have problems processing the file. I am using ffmpeg static build
(N-47112-gec51b33,
> ffprobe -show_format -show_streams -of json -v 2 input.mp3
"streams": [
"index": 0,
"codec_name": "mp3",
"codec_long_name": "MP3 (MPEG audio layer 3)",
"codec_type": "audio",
"codec_time_base": "1/0",
"codec_tag_string": "[0][0][0][0]",
"codec_tag": "0x0000",
"sample_fmt": "s16",
"sample_rate": "0",
"channels": 0,
"bits_per_sample": 0,
"r_frame_rate": "0/0",
"avg_frame_rate": "0/0",
"time_base": "1/",
"start_pts": 0,
"start_time": "0.000000",
As you see, there are no channels reported and 0 sample_rate.
And for ffmpeg:
> ./ffmpeg
-i ~/snd/input.mp3
/tmp/out.ts
ffmpeg version N-47112-gec51b33 Copyright (c)
the FFmpeg
developers
built on Nov 26 :57 with gcc 4.7 (Debian 4.7.2-4)
configuration: --extra-cflags=-I../static/include
--extra-ldflags='-L../static/lib -static' --enable-gpl --enable-version3
--enable-static --disable-shared --disable-debug --enable-runtime-cpudetect
--disable-x11grab --enable-libmp3lame --enable-libx264 --enable-libspeex
--enable-libvorbis --enable-libvpx --enable-libfreetype --enable-libxvid
--enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libxavs
--enable-libtheora --enable-libvo-aacenc --enable-libvo-amrwbenc
--enable-gray --enable-libopenjpeg --disable-ffserver
9.102 / 52.
libavcodec
54. 77.100 / 54. 77.100
libavformat
54. 37.100 / 54. 37.100
libavdevice
3.100 / 54.
libavfilter
3. 23.102 /
libswscale
libswresample
0. 17.101 /
libpostproc
2.100 / 52.
[mp3 @ 0x27468c0] Format mp3 detected only with low score of 24,
misdetection possible!
[mp3 @ 0x27468c0] Stream #0: not enough fra consider
increasing probesize
[mp3 @ 0x27468c0] Stream #1: not enough fra consider
increasing probesize
[mp3 @ 0x27468c0] Stream #2: not enough fra consider
increasing probesize
[mp3 @ 0x27468c0] Could not find codec parameters for stream 0 (Audio: mp3,
0 channels, s16p): unspecified frame size
Consider increasing the value for the 'analyzeduration' and 'probesize'
[mp3 @ 0x27468c0] Estimating duration from bitrate, this may be inaccurate
Input #0, mp3, from '/home/joakim/snd/input.mp3':
: 29.11.2012 Radioresepsjonen
: NRK P3 - Radioresepsjonen
: NRK P3 - Radioresepsjonen
Duration: N/A, start: 0.000000, bitrate: N/A
Stream #0:0: Audio: mp3, 0 channels, s16p
Stream #0:1: Video: bmp, bgr24, , 90k tbr, 90k tbn, 90k tbc
: Cover (front)
Stream #0:2: Video: bmp, bgr24, , 90k tbr, 90k tbn, 90k tbc
: Cover (front)
Output #0, mpegts, to '/tmp/out.ts':
: 29.11.2012 Radioresepsjonen
: NRK P3 - Radioresepsjonen
: NRK P3 - Radioresepsjonen
: Lavf54.37.100
Stream #0:0: Video: mpeg2video, yuv420p, , q=2-31, 200 kb/s,
90k tbn, 240 tbc
: Cover (front)
Stream mapping:
Stream #0:1 -> #0:0 (bmp -> mpeg2video)
Press [q] to stop, [?] for help
1 fps=0.0 q=7.9 Lsize=
98kB time=00:00:00.00
bitrate=kbits/s
video:91kB audio:0kB subtitle:0 global headers:0kB muxing overhead 8.204354%
The result is an 99kb unplayable file. I have played with probesize and
analyzeduration, without success.
Does someone see what is wrong here?
From joolzg at btinternet.com
3 17:17:44 2012
From: joolzg at btinternet.com (JULIAN GARDNER)
Date: Mon, 3 Dec :44 +0000 (GMT)
Subject: [FFmpeg-user] Replacing audio track failing
Message-ID:
Im trying to fix the audio levels of my video files using sox to normalize but im having a few problems, in 3 steaps
? ? ? ? ? ? ? ? $FFMPEG -i "$file" -vn -y extracted.wav
??????????????? echo Now Normalizing the audio
??????????????? $SOX extracted.wav normal.wav -V3
??????????????? echo Now converting "$file" to "$tsfile"
???????????????
$FFMPEG -threads 0 -i "$file" -i normal.wav -map 0:0 -map 1 -vcodec
libx264 -preset superfast -x264opts keyint=75 -x264opts vbv-maxrate=900
-vf scale=720:288 -bufsize 2M -r 25 -acodec libfaac -ab 128k -ar 32k -ac
2 -async 1 -f mpegts "$DEST_DIR/$tsfile"
Now extracting audio from /mnt/media1/Jukebox_upload/Front 242 - Headhunter.mpg
ffmpeg version N-44994-gf077e1f Copyright (c)
the FFmpeg developers
? built on Oct? 3 :57 with gcc 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3)
? configuration: --enable-gpl --enable-version3 --enable-nonfree --enable-postproc --enable-libfaac --enable-libmp3lame --enable-libx264
? libavutil????? 51. 73.101 / 51. 73.101
? libavcodec???? 54. 63.100 / 54. 63.100
? libavformat??? 54. 29.105 / 54. 29.105
? libavdevice??? 54.? 3.100 / 54.? 3.100
? libavfilter???? 3. 19.102 /? 3. 19.102
? libswscale????? 2.? 1.101 /? 2.? 1.101
? libswresample?? 0. 16.100 /? 0. 16.100
? libpostproc??? 52.? 1.100 / 52.? 1.100
[mpeg @ 0x30fb240] max_analyze_duration 5000000 reached at 5005000
Input #0, mpeg, from '/mnt/media1/Jukebox_upload/Front 242 - Headhunter.mpg':
? Duration: 00:03:21.03, start: 0.659989, bitrate: 1394 kb/s
??? Stream #0:0[0x1e0]: Video: mpeg1video, yuv420p, 352x240 [SAR 200:219 DAR 880:657], 1150 kb/s, 29.97 fps, 29.97 tbr, 90k tbn, 29.97 tbc
??? Stream #0:1[0x1c0]: Audio: mp2, 44100 Hz, stereo, s16, 224 kb/s
Output #0, wav, to 'extracted.wav':
? Metadata:
??? encoder???????? : Lavf54.29.105
??? Stream #0:0: Audio: pcm_s16le ([1][0][0][0] / 0x0001), 44100 Hz, stereo, s16, 1411 kb/s
Stream mapping:
? Stream #0:1 -> #0:0 (mp2 -> pcm_s16le)
Press [q] to stop, [?] for help
incomplete frametime=00:02:36.21 bitrate=1409.6kbits/s
Error while decoding stream #0:1: Invalid data found when processing input
size=?? 34547kB time=00:03:20.54 bitrate=1411.2kbits/s
video:0kB audio:34546kB subtitle:0 global headers:0kB muxing overhead 0.000130%
/usr/bin/sox: SoX v14.3.1
/usr/bin/sox INFO formats: detected file format type `wav'
Input File???? : 'extracted.wav'
Channels?????? : 2
Sample Rate??? : 44100
Precision????? : 16-bit
Duration?????? : 00:03:20.54 = 8843904 samples = 15040.7 CDDA sectors
File Size????? : 35.4M
Bit Rate?????? : 1.41M
Sample Encoding: 16-bit Signed Integer PCM
Endian Type??? : little
Reverse Nibbles: no
Reverse Bits?? : no
/usr/bin/sox INFO sox: Overwriting `normal.wav'
Output File??? : 'normal.wav'
Channels?????? : 2
Sample Rate??? : 44100
Precision????? : 16-bit
Duration?????? : 00:03:20.54 = 8843904 samples = 15040.7 CDDA sectors
Sample Encoding: 16-bit Signed Integer PCM
Endian Type??? : little
Reverse Nibbles: no
Reverse Bits?? : no
Comment??????? : 'Processed by SoX'
/usr/bin/sox INFO sox: effects chain: input????? 44100Hz 2 channels
/usr/bin/sox INFO sox: effects chain: output???? 44100Hz 2 channels
Now converting /mnt/media1/Jukebox_upload/Front 242 - Headhunter.mpg to Front 242 - Headhunter.ts
ffmpeg version N-44994-gf077e1f Copyright (c)
the FFmpeg developers
? built on Oct? 3 :57 with gcc 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3)
? configuration: --enable-gpl --enable-version3 --enable-nonfree --enable-postproc --enable-libfaac --enable-libmp3lame --enable-libx264
? libavutil????? 51. 73.101 / 51. 73.101
? libavcodec???? 54. 63.100 / 54. 63.100
? libavformat??? 54. 29.105 / 54. 29.105
? libavdevice??? 54.? 3.100 / 54.? 3.100
? libavfilter???? 3. 19.102 /? 3. 19.102
? libswscale????? 2.? 1.101 /? 2.? 1.101
? libswresample?? 0. 16.100 /? 0. 16.100
? libpostproc??? 52.? 1.100 / 52.? 1.100
[mpeg @ 0x19ed340] max_analyze_duration 5000000 reached at 5005000
Input #0, mpeg, from '/mnt/media1/Jukebox_upload/Front 242 - Headhunter.mpg':
? Duration: 00:03:21.03, start: 0.659989, bitrate: 1394 kb/s
??? Stream #0:0[0x1e0]: Video: mpeg1video, yuv420p, 352x240 [SAR 200:219 DAR 880:657], 1150 kb/s, 29.97 fps, 29.97 tbr, 90k tbn, 29.97 tbc
??? Stream #0:1[0x1c0]: Audio: mp2, 44100 Hz, stereo, s16, 224 kb/s
[wav @ 0x19f4400] max_analyze_duration 5000000 reached at 5015510
Guessed Channel Layout for? Input Stream #1.0 : stereo
Input #1, wav, from 'normal.wav':
? Duration: 00:03:20.54, bitrate: 1411 kb/s
??? Stream #1:0: Audio: pcm_s16le ([1][0][0][0] / 0x0001), 44100 Hz, stereo, s16, 1411 kb/s
Unknown decoder 'libx264'
Ive tried the "-i normal.wav" at the begining and after the video parameters, but seem to get this error every time, any ideas why it seems the audio as a 2 channel wav and wants to decode it?
From rogerdpack2 at gmail.com
3 17:19:50 2012
From: rogerdpack2 at gmail.com (Roger Pack)
Date: Mon, 3 Dec :50 -0700
Subject: [FFmpeg-user] Help with encoding
In-Reply-To:
References:
Message-ID:
I want to convert it to .ogg file and preserve its:
> audio/video parameters like bit rate aspect ratio and amount of pixels, but
> when I try to encode it with ffmpeg it always lowers audio/video bit rate.
My guess is ffmpeg is "transcoding" it to something else.
try -acodec copy -vcodec copy?
From rogerdpack2 at gmail.com
3 17:21:43 2012
From: rogerdpack2 at gmail.com (Roger Pack)
Date: Mon, 3 Dec :43 -0700
Subject: [FFmpeg-user] multi pass encoding
In-Reply-To:
References:
Message-ID:
On 12/1/12, Levan Chelidze
Sorry I am really new to this and have problems doing some tasks without
> So I got a terminal commend
> ffmpeg -y -i '/media/levan/BEEA60D8EA608E89/Downloads/Videos/Tony Braxton -
>> Un-Break My Heart.VOB' -s
-aspect 16:9 -r 25 -b 15550k -bt
>> -vcodec libtheora -acodec libvorbis -ac 2 -ar 48000 -ab 320k ddd.ogg
> and I want to have 3 pass video in output video but how to do this I do not
> know can some on help me
I am not sure what 3 pass is.
https://ffmpeg.org/trac/ffmpeg/wiki/x264EncodingGuide describes 2 pass a bit.
From cehoyos at ag.or.at
3 18:25:10 2012
From: cehoyos at ag.or.at (Carl Eugen Hoyos)
Date: Mon, 3 Dec :10 +0000 (UTC)
Subject: [FFmpeg-user] Replacing audio track failing
References:
Message-ID:
JULIAN GARDNER <joolzg
btinternet.com> writes:
$FFMPEG -threads 0 -i "$file" -i normal.wav -map 0:0 -map 1 -vcodec
> libx264 -preset superfast -x264opts keyint=75 -x264opts vbv-maxrate=900
> -vf scale=720:288 -bufsize 2M -r 25 -acodec libfaac -ab 128k -ar 32k -ac
2 -async 1 -f mpegts "$DEST_DIR/$tsfile"
You should try as hard as possible not to use variables
in the command lines you post here.
(I don't see the problem in above line although there
obviously is one - perhaps you can change your script
so it does print what it executes or add -report)
> Unknown decoder 'libx264'
Carl Eugen
From joolzg at btinternet.com
3 18:32:44 2012
From: joolzg at btinternet.com (JULIAN GARDNER)
Date: Mon, 3 Dec :44 +0000 (GMT)
Subject: [FFmpeg-user] Replacing audio track failing
In-Reply-To:
References:
Message-ID:
>________________________________
> From: Carl Eugen Hoyos
>To: ffmpeg-user at ffmpeg.org
>Sent: Monday, 3 December
>Subject: Re: [FFmpeg-user] Replacing audio track failing
>JULIAN GARDNER <joolzg
btinternet.com> writes:
>>? $FFMPEG -threads 0 -i "$file" -i normal.wav -map 0:0 -map 1 -vcodec
>> libx264 -preset superfast -x264opts keyint=75 -x264opts vbv-maxrate=900
>> -vf scale=720:288 -bufsize 2M -r 25 -acodec libfaac -ab 128k -ar 32k -ac
>>? 2 -async 1 -f mpegts "$DEST_DIR/$tsfile"
>You should try as hard as possible not to use variables
>in the command lines you post here.
>(I don't see the problem in above line although there
>obviously is one - perhaps you can change your script
>so it does print what it executes or add -report)
>> Unknown decoder 'libx264'
>Carl Eugen
OK will do, but as you have everything including command line and UNCUT output i did not see this as a problem.
replace "$file" with "/mnt/media1/Jukebox_upload/Front 242 - Headhunter.mpg"
replace "$DEST_DIR/$tsfile" with "/mnt/media1/Jukebox/Front 242 - Headhunter.ts"
or to be pedantic
replace "$DEST_DIR" with "/mnt/media1/Jukebox"
replace "$tsfile" with "Front 242 - Headhunter.ts"
From brysgo at gmail.com
3 18:33:46 2012
From: brysgo at gmail.com (Bryan Goldstein)
Date: Mon, 3 Dec :46 -0500
Subject: [FFmpeg-user] libdc1394 troubles
In-Reply-To:
References:
Message-ID:
If it helps, the error is being thrown in libavdevice/libdc1394.c when a
sanity check is reached and the fps->framerate appears to be zero (which
I'm guessing it shouldn't be).
On Sun, Dec 2, 2012 at 11:13 AM, Bryan Goldstein
> Here it is uncut:
> omap3-multi:~$ sudo ffmpeg -loglevel debug -v verbose -f libdc1394 -i
> hw:0,0 -vcodec mpeg4 -b:v 10000k -bufsize 150000k -r 640x480
> http://127.0.0.1:8090/feed1.ffm
> Password:
> ffmpeg version N-4c19 Copyright (c)
the FFmpeg
> developers
built on Nov 30 :28 with gcc 4.5.3 (GCC)
(prerelease)
configuration: --enable-libdc1394
9.102 / 52.
libavcodec
54. 77.100 / 54. 77.100
libavformat
54. 40.100 / 54. 40.100
libavdevice
3.100 / 54.
libavfilter
3. 23.104 /
libswscale
libswresample
0. 17.101 /
> [libdc1394 @ 0x1cdc520] Can't find matching camera format for uyvy422,
> 320x240 at fps
> hw:0,0: Operation not permitted
> However, I can still get the same output by just doing `ffmpeg -f
> libdc1394 -i hw:0,0`
> On Fri, Nov 30, 2012 at 7:41 PM, Lou
>> On Fri, 30 Nov :31 -0500
>> Bryan Goldstein
>> > Hello,
>> > I am new to ffmpeg and I am having some trouble using my libdc1394
>> > supported webcam with it. I keep getting the same error:
>> > [libdc1394 @ 0x1722520] Can't find matching camera format for uyvy422,
>> > 320x240 at fps
>> > hw:0,0: Operation not permitted
>> > Here is some build info:
>> > ffmpeg version N-4c19 Copyright (c)
the FFmpeg
>> > developers
built on Nov 30 :28 with gcc 4.5.3 (GCC)
>> (prerelease)
configuration: --enable-libdc1394
9.102 / 52.
libavcodec
54. 77.100 / 54. 77.100
libavformat
54. 40.100 / 54. 40.100
libavdevice
3.100 / 54.
libavfilter
3. 23.104 /
libswscale
libswresample
0. 17.101 /
>> > libdc1394 version is 2.2.0
>> > Camera is Chameleon CMLN-13S2C
>> > Does anyone have any idea as to what I could be doing wrong?
>> > Thanks,
>> > Bryan
>> Please provide the complete ffmpeg command line and the complete, uncut
>> console output.
>> _______________________________________________
>> ffmpeg-user mailing list
>> ffmpeg-user at ffmpeg.org
>> http://ffmpeg.org/mailman/listinfo/ffmpeg-user
From vinayrnagar at gmail.com
3 19:34:36 2012
From: vinayrnagar at gmail.com (Vinay Nagar)
Date: Mon, 3 Dec :36 -0600
Subject: [FFmpeg-user] ffmpeg and opencv
In-Reply-To:
References:
Message-ID:
I am using the class CvVideoWriter_FFMPEG. When I run my program I get the
following error "Could not open codec 'mpeg1video". Can I please get some
*Vinay Nagar*
217.979.6401
From brysgo at gmail.com
3 19:44:43 2012
From: brysgo at gmail.com (Bryan Goldstein)
Date: Mon, 3 Dec :43 -0500
Subject: [FFmpeg-user] libdc1394 troubles
In-Reply-To:
References:
Message-ID:
Okay, it worked when I manually set the fps inside of
to the right framerate object. What I don't get is why it didn't just work
to use `-r 7500`, anyone know what I'm doing wrong?
On Mon, Dec 3, 2012 at 12:33 PM, Bryan Goldstein
> If it helps, the error is being thrown in libavdevice/libdc1394.c when a
> sanity check is reached and the fps->framerate appears to be zero (which
> I'm guessing it shouldn't be).
> On Sun, Dec 2, 2012 at 11:13 AM, Bryan Goldstein
>> Hi Lou,
>> Here it is uncut:
>> omap3-multi:~$ sudo ffmpeg -loglevel debug -v verbose -f libdc1394 -i
>> hw:0,0 -vcodec mpeg4 -b:v 10000k -bufsize 150000k -r 640x480
>> http://127.0.0.1:8090/feed1.ffm
>> Password:
>> ffmpeg version N-4c19 Copyright (c)
the FFmpeg
>> developers
built on Nov 30 :28 with gcc 4.5.3 (GCC)
(prerelease)
configuration: --enable-libdc1394
9.102 / 52.
libavcodec
54. 77.100 / 54. 77.100
libavformat
54. 40.100 / 54. 40.100
libavdevice
3.100 / 54.
libavfilter
3. 23.104 /
libswscale
libswresample
0. 17.101 /
>> [libdc1394 @ 0x1cdc520] Can't find matching camera format for uyvy422,
>> 320x240 at fps
>> hw:0,0: Operation not permitted
>> However, I can still get the same output by just doing `ffmpeg -f
>> libdc1394 -i hw:0,0`
>> Thanks,
>> On Fri, Nov 30, 2012 at 7:41 PM, Lou
>>> On Fri, 30 Nov :31 -0500
>>> Bryan Goldstein
>>> > Hello,
>>> > I am new to ffmpeg and I am having some trouble using my libdc1394
>>> > supported webcam with it. I keep getting the same error:
>>> > ----
>>> > [libdc1394 @ 0x1722520] Can't find matching camera format for uyvy422,
>>> > 320x240 at fps
>>> > hw:0,0: Operation not permitted
>>> > ----
>>> > Here is some build info:
>>> > ffmpeg version N-4c19 Copyright (c)
the FFmpeg
>>> > developers
built on Nov 30 :28 with gcc 4.5.3 (GCC)
>>> (prerelease)
configuration: --enable-libdc1394
9.102 / 52.
libavcodec
54. 77.100 / 54. 77.100
libavformat
54. 40.100 / 54. 40.100
libavdevice
3.100 / 54.
libavfilter
3. 23.104 /
libswscale
libswresample
0. 17.101 /
>>> > libdc1394 version is 2.2.0
>>> > Camera is Chameleon CMLN-13S2C
>>> > Does anyone have any idea as to what I could be doing wrong?
>>> > Thanks,
>>> > Bryan
>>> Please provide the complete ffmpeg command line and the complete, uncut
>>> console output.
>>> _______________________________________________
>>> ffmpeg-user mailing list
>>> ffmpeg-user at ffmpeg.org
>>> http://ffmpeg.org/mailman/listinfo/ffmpeg-user
From joolzg at btinternet.com
3 19:47:35 2012
From: joolzg at btinternet.com (JULIAN GARDNER)
Date: Mon, 3 Dec :35 +0000 (GMT)
Subject: [FFmpeg-user] Replacing audio track failing
In-Reply-To:
References:
Message-ID:
----- Original Message -----
> From: JULIAN GARDNER
> To: FFmpeg user questions
> Sent: Monday, 3 December
> Subject: Re: [FFmpeg-user] Replacing audio track failing
>> ________________________________
From: Carl Eugen Hoyos
>> To: ffmpeg-user at ffmpeg.org
>> Sent: Monday, 3 December
>> Subject: Re: [FFmpeg-user] Replacing audio track failing
>> JULIAN GARDNER <joolzg
btinternet.com> writes:
>>> ? $FFMPEG -threads 0 -i "$file" -i normal.wav -map 0:0 -map 1
libx264 -preset superfast -x264opts keyint=75 -x264opts vbv-maxrate=900
-vf scale=720:288 -bufsize 2M -r 25 -acodec libfaac -ab 128k -ar 32k
>>> ? 2 -async 1 -f mpegts "$DEST_DIR/$tsfile"
>> You should try as hard as possible not to use variables
>> in the command lines you post here.
>> (I don't see the problem in above line although there
>> obviously is one - perhaps you can change your script
>> so it does print what it executes or add -report)
Unknown decoder 'libx264'
>> Carl Eugen
> OK will do, but as you have everything including command line and UNCUT output i
> did not see this as a problem.
> replace "$file" with "/mnt/media1/Jukebox_upload/Front 242 -
> Headhunter.mpg"
> replace "$DEST_DIR/$tsfile" with "/mnt/media1/Jukebox/Front 242 -
> Headhunter.ts"
> or to be pedantic
> replace "$DEST_DIR" with "/mnt/media1/Jukebox"
> replace "$tsfile" with "Front 242 - Headhunter.ts"
encoder at encoder21:~/.services/JukeboxC$ /usr/local/bin/ffmpeg -threads 0 -i "/mnt/media1/Jukebox_upload/Front 242 - Headhunter.mpg" -i normal.wav -map 0:0 -map 1 -vcodec libx264 -preset superfast -x264opts keyint=75 -x264opts vbv-maxrate=900 -vf scale=720:288 -bufsize 2M -r 25 -i extracted.wav -acodec libfaac -ab 128k -ar 32k -ac 2 -async 1 -f mpegts a.ts
ffmpeg version N-44994-gf077e1f Copyright (c)
the FFmpeg developers
? built on Oct? 3 :57 with gcc 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3)
? configuration: --enable-gpl --enable-version3 --enable-nonfree --enable-postproc --enable-libfaac --enable-libmp3lame --enable-libx264
? libavutil????? 51. 73.101 / 51. 73.101
? libavcodec???? 54. 63.100 / 54. 63.100
? libavformat??? 54. 29.105 / 54. 29.105
? libavdevice??? 54.? 3.100 / 54.? 3.100
? libavfilter???? 3. 19.102 /? 3. 19.102
? libswscale????? 2.? 1.101 /? 2.? 1.101
? libswresample?? 0. 16.100 /? 0. 16.100
? libpostproc??? 52.? 1.100 / 52.? 1.100
[mpeg @ 0x3053340] max_analyze_duration 5000000 reached at 5005000
Input #0, mpeg, from '/mnt/media1/Jukebox_upload/Front 242 - Headhunter.mpg':
? Duration: 00:03:21.03, start: 0.659989, bitrate: 1394 kb/s
??? Stream #0:0[0x1e0]: Video: mpeg1video, yuv420p, 352x240 [SAR 200:219 DAR 880:657], 1150 kb/s, 29.97 fps, 29.97 tbr, 90k tbn, 29.97 tbc
??? Stream #0:1[0x1c0]: Audio: mp2, 44100 Hz, stereo, s16, 224 kb/s
[wav @ 0x305a400] max_analyze_duration 5000000 reached at 5015510
Guessed Channel Layout for? Input Stream #1.0 : stereo
Input #1, wav, from 'normal.wav':
? Duration: 00:03:20.54, bitrate: 1411 kb/s
??? Stream #1:0: Audio: pcm_s16le ([1][0][0][0] / 0x0001), 44100 Hz, stereo, s16, 1411 kb/s
Unknown decoder 'libx264'
Its a pretty simple script, take a file, strip the audio, normalize the audio, transcode the file to a lower rate with the normalized audio.
From lou at lrcd.com
3 20:04:18 2012
From: lou at lrcd.com (Lou)
Date: Mon, 3 Dec :18 -0900
Subject: [FFmpeg-user] Help with encoding
In-Reply-To:
References:
Message-ID:
On Mon, 3 Dec :50 -0700
Roger Pack
I want to convert it to .ogg file and preserve its:
> > audio/video parameters like bit rate aspect ratio and amount of pixels, but
> > when I try to encode it with ffmpeg it always lowers audio/video bit rate.
> My guess is ffmpeg is "transcoding" it to something else.
> try -acodec copy -vcodec copy?
I doubt ogg container will accept H.264 and/or pcm_s16le.
From stainberg.back at gmail.com
3 13:22:53 2012
From: stainberg.back at gmail.com (Yen.Back)
Date: Mon, 3 Dec :53 +0800
Subject: [FFmpeg-user] about ffmpeg with libstagefright
Message-ID:
I am having problems compiling stagefright with ffmpeg. We are using
the build_libstagefright script that comes in the tools directory of
ffmpeg. But when I run this script, I am getting this error:
Fetching Android system headers
Fetching Android libraries for linking
ERROR: libstagefright_h264 not found
How should the problem be solved?
Stainberg Yen
From james.darnley at gmail.com
3 21:01:34 2012
From: james.darnley at gmail.com (James Darnley)
Date: Mon, 03 Dec :34 +0100
Subject: [FFmpeg-user] Replacing audio track failing
In-Reply-To:
References:
Message-ID:
19:47, JULIAN GARDNER wrote:
> ... -i extracted.wav -acodec libfaac -ab 128k -ar 32k -ac 2 -async 1 -f mpegts a.ts
^^^^^^^^^^^^^^^^
Here's your problem.
You have a stray -i later in your command line.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 552 bytes
Desc: OpenPGP digital signature
From joolzg at btinternet.com
3 21:09:52 2012
From: joolzg at btinternet.com (JULIAN GARDNER)
Date: Mon, 3 Dec :52 +0000 (GMT)
Subject: [FFmpeg-user] Replacing audio track failing
In-Reply-To:
References:
Message-ID:
----- Original Message -----
> From: James Darnley
> To: FFmpeg user questions
> Sent: Monday, 3 December
> Subject: Re: [FFmpeg-user] Replacing audio track failing
19:47, JULIAN GARDNER wrote:
... -i extracted.wav -acodec libfaac -ab 128k -ar 32k -ac 2 -async 1 -f
> mpegts a.ts
> ? ? ? ^^^^^^^^^^^^^^^^
> Here's your problem.? You have a stray -i later in your command line.
> _______________________________________________
> ffmpeg-user mailing list
> ffmpeg-user at ffmpeg.org
> http://ffmpeg.org/mailman/listinfo/ffmpeg-user
Thanks could not see the wood for the trees, you look at something so many times you just dont see simple errors
From brysgo at gmail.com
3 23:11:41 2012
From: brysgo at gmail.com (Bryan Goldstein)
Date: Mon, 3 Dec :41 -0500
Subject: [FFmpeg-user] libdc1394 troubles
In-Reply-To:
References:
Message-ID:
I finally resolved the issue. I wasn't setting the framerate right in two
1) The 7500 should have been 7.5 .
2) The '-r' flag must go *before* the input device if it is to be applied
to the input.
So in case anyone else wants to figure those things out without looking
stupid they can!
Your welcome,
On Mon, Dec 3, 2012 at 1:44 PM, Bryan Goldstein
> Okay, it worked when I manually set the fps inside of
> to the right framerate object. What I don't get is why it didn't just work
> to use `-r 7500`, anyone know what I'm doing wrong?
> On Mon, Dec 3, 2012 at 12:33 PM, Bryan Goldstein
>> If it helps, the error is being thrown in libavdevice/libdc1394.c when a
>> sanity check is reached and the fps->framerate appears to be zero (which
>> I'm guessing it shouldn't be).
>> - Bryan
>> On Sun, Dec 2, 2012 at 11:13 AM, Bryan Goldstein wrote:
>>> Hi Lou,
>>> Here it is uncut:
>>> omap3-multi:~$ sudo ffmpeg -loglevel debug -v verbose -f libdc1394 -i
>>> hw:0,0 -vcodec mpeg4 -b:v 10000k -bufsize 150000k -r 640x480
>>> http://127.0.0.1:8090/feed1.ffm
>>> Password:
>>> ffmpeg version N-4c19 Copyright (c)
the FFmpeg
>>> developers
built on Nov 30 :28 with gcc 4.5.3 (GCC)
>>> (prerelease)
configuration: --enable-libdc1394
9.102 / 52.
libavcodec
54. 77.100 / 54. 77.100
libavformat
54. 40.100 / 54. 40.100
libavdevice
3.100 / 54.
libavfilter
3. 23.104 /
libswscale
libswresample
0. 17.101 /
>>> [libdc1394 @ 0x1cdc520] Can't find matching camera format for uyvy422,
>>> 320x240 at fps
>>> hw:0,0: Operation not permitted
>>> However, I can still get the same output by just doing `ffmpeg -f
>>> libdc1394 -i hw:0,0`
>>> Thanks,
>>> On Fri, Nov 30, 2012 at 7:41 PM, Lou
>>>> On Fri, 30 Nov :31 -0500
>>>> Bryan Goldstein
>>>> > Hello,
>>>> > I am new to ffmpeg and I am having some trouble using my libdc1394
>>>> > supported webcam with it. I keep getting the same error:
>>>> > ----
>>>> > [libdc1394 @ 0x1722520] Can't find matching camera format for uyvy422,
>>>> > 320x240 at fps
>>>> > hw:0,0: Operation not permitted
>>>> > ----
>>>> > Here is some build info:
>>>> > ffmpeg version N-4c19 Copyright (c)
the FFmpeg
>>>> > developers
built on Nov 30 :28 with gcc 4.5.3 (GCC)
>>>> (prerelease)
configuration: --enable-libdc1394
9.102 / 52.
libavcodec
54. 77.100 / 54. 77.100
libavformat
54. 40.100 / 54. 40.100
libavdevice
3.100 / 54.
libavfilter
3. 23.104 /
libswscale
libswresample
0. 17.101 /
>>>> > libdc1394 version is 2.2.0
>>>> > Camera is Chameleon CMLN-13S2C
>>>> > Does anyone have any idea as to what I could be doing wrong?
>>>> > Thanks,
>>>> > Bryan
>>>> Please provide the complete ffmpeg command line and the complete, uncut
>>>> console output.
>>>> _______________________________________________
>>>> ffmpeg-user mailing list
>>>> ffmpeg-user at ffmpeg.org
>>>> http://ffmpeg.org/mailman/listinfo/ffmpeg-user
From Doug_Bay at discovery.com
3 23:23:51 2012
From: Doug_Bay at discovery.com (Doug Bay)
Date: Mon, 3 Dec :51 +0000
Subject: [FFmpeg-user] test
Message-ID:
Test please ignore/del
This e-mail, and any attachment, is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, re-transmission, copying, dissemination or other use of this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer. The contents of this message may contain personal views which are not the views of Discovery Communications, Inc.
From Doug_Bay at discovery.com
3 23:27:10 2012
From: Doug_Bay at discovery.com (Doug Bay)
Date: Mon, 3 Dec :10 +0000
Subject: [FFmpeg-user] Wrapping DNxHD in a MXF
Message-ID:
I have a DNxHD essence that was transcoded from MPEG2 within FFMPEG. The video essence is RAW, it's not wrapped in any format. How can I wrap the video into an MXF? I have tried this command:
ffmpeg -i MPEGTStoDNXHD -vcodec copy -acodec copy DNxHD.MXF
I get the following error:
[mxf @ 0x8441880] track 0: could not find essence container ul, codec not currently supported in container
If FFMPEG cant do it, does anyone know of a different way within Linux?
This e-mail, and any attachment, is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, re-transmission, copying, dissemination or other use of this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer. The contents of this message may contain personal views which are not the views of Discovery Communications, Inc.
From cehoyos at ag.or.at
3 23:33:42 2012
From: cehoyos at ag.or.at (Carl Eugen Hoyos)
Date: Mon, 3 Dec :42 +0000 (UTC)
Subject: [FFmpeg-user] Wrapping DNxHD in a MXF
References:
Message-ID:
Doug Bay <Doug_Bay
discovery.com> writes:
> ffmpeg -i MPEGTStoDNXHD -vcodec copy -acodec copy DNxHD.MXF
> I get the following error:
Complete, uncut console output missing.
(It works fine here with a dnxhd sample.)
Carl Eugen
From bobm-ffmpeg at burner.com
3 23:37:08 2012
From: bobm-ffmpeg at burner.com (Bob Maple)
Date: Mon, 03 Dec :08 -0700
Subject: [FFmpeg-user] Wrapping DNxHD in a MXF
In-Reply-To:
References:
Message-ID:
On 12/3/ PM, Doug Bay wrote:
> ffmpeg -i MPEGTStoDNXHD -vcodec copy -acodec copy DNxHD.MXF
Taking a guess without testing, try specifying "-f dnxhd" prior to your
-i to force it into knowing what it is.
From cehoyos at ag.or.at
3 23:41:56 2012
From: cehoyos at ag.or.at (Carl Eugen Hoyos)
Date: Mon, 3 Dec :56 +0000 (UTC)
Subject: [FFmpeg-user] Wrapping DNxHD in a MXF
References:
Message-ID:
Bob Maple <bobm-ffmpeg
burner.com> writes:
> On 12/3/ PM, Doug Bay wrote:
> > ffmpeg -i MPEGTStoDNXHD -vcodec copy -acodec copy DNxHD.MXF
> Taking a guess without testing, try specifying "-f dnxhd"
> prior to your -i to force it into knowing what it is.
But don't you agree that this would indicate a bug that the
developers should really try to fix?
(Which would be completely impossible without a complete
bug report.)
Carl Eugen
From cehoyos at ag.or.at
3 23:59:46 2012
From: cehoyos at ag.or.at (Carl Eugen Hoyos)
Date: Mon, 3 Dec :46 +0000 (UTC)
Subject: [FFmpeg-user] Unable to analyze/transcode mp3
References:
Message-ID:
Joakim Simonsson <nospam
joakims.com> writes:
> [mp3 @ 0x27468c0] Could not find codec parameters for
> stream 0 (Audio: mp3, 0 channels, s16p): unspecified frame size
> Consider increasing the value for the 'analyzeduration'
> and 'probesize' options
Did you read this?
The mp3 file contains 8MB of image attachments in
the beginning. Since input can be slow (although
it normally isn't), ffmpeg does not scan the whole
stream but only a part of it. Increasing the default
value would not really help, because the next encoder
may decide to put 80MB in front of the first real
mp3 frame.
-probesize 9M works fine.
Carl Eugen
From rogerdpack2 at gmail.com
4 00:06:47 201}